FL060 Specifications(Standard)

• Contact Material

  Precious metal brush,Silver plated rings

• Current Rating

  2A,5A,10A,20A/per circuit

• Number of Circuits

  2, 4, 6, 12, 18, 24, 36, 48, 56, 72, 80, 100

• Operating Speed

  300 rpm* continuous

• Lead Wire

  UL Teflon® Awg28,Awg22,Awg16,Awg10 (200 mm)

• Voltage

  600 VAC

• Operating Temp.

  -40°C to 80°C

• Working Humidity

  60%RH

• Torque

  Approx. ≤9.55 g·m (for reference )

• Dielectric Strength

  ≥1000V@50Hz between each circuit

• Insulation Resistance

  1000MΩ@ 600VDC

• Noise

  Less than 60 mΩ @ 6 VDC, 50 mA, 5 rpm

• Housing Material

  Aluminum Alloy

• Protection

  IP51

*Please note that the operational life of the unit is dependent upon rotational speed, environment and temperature.

• Longer lead lengths available
• Power and signal combinations
• Rotor and stator lead exits
• gold alloy brush,Gold plated rings
• IP65,IP68 are optional
• flange mounting is optional
• Note: in below table,X- specifies current capacity of power circuits.
  10, 15 and 20 amp available. See ordering instructions for details